M/s Tech Medical Systems is a registered firm working in various fields i.e. Medical Gas Pipeline, Pre-Fabricated Modular Operation Theaters, Plumbing, Fire Fighting & HVAC Systems, Hospital All Interior which deals in Total Hospital Projects and Products. M/s Tech Medical Systems is a Group of the most Intelligent Personalities which are working for the last 12 years in Health Care Projects.
Our Health Care Projects and production team is headed by Mr. Dhanpal Kohli. And Mr Dhanpal Kohli is involved in this particular field for last 12 Years and company growing to the excellence under his leadership.
Today the company practices stringent quality standards and have uncompromising commitment towards complete Customer satisfaction.
M/s Tech Medical Systems has its Independent design & engineering wing with qualified engineers and headed by good management personnel having thorough knowledge of national and international design codes such as HTM0201, SB, NABH, NBC, TAC, NFPA. NEC etc.
M/s Tech Medical Systems have efficient project management department monitored by well qualified management for complete customer satisfaction and to ensure timely completion of the job. Company has adequate qualified project man power that is fully empowered to take the decision and get the job done.
The company job is not finished once the system is installed & commissioned. It has a comprehensive servicing, testing & upgrading capability which ensure to our prestigious customers that the installation will continue effectively for the years to come.
INSTALLATION & TESTING
Installation of piping shall be carried out with utmost cleanliness. Only pipes, fittings and valves which have been de-greased and fittings brought in polythene sealed bags shall be used at site. Pipe fixing clamps shall be of nonferrous or nondeteriorating plastic suitable for the diameter of the
pipe. All joints shall be made of copper to copper and brazed by silver brazing filler material.
MEDICAL COMPRESSED AIR COMBINED AIR PLANT
AND SURGICAL AIR PLANT ( 4 BAR,7BAR)
Air Plant System The Medical Air system shall conform to NFPA 99/EN
ISO7396-1/HTM02-01.Medical quality air to the European Pharmacopoeia monograph shall be delivered at pressures of 700kPa (7 bar) gauge for supply of the hospital medical or surgical air systems. The entire system shall be ‘Triplex” such that any single functional component failure will not affect the integrity of the medical compressed air supply.
Vacuum system fully compliant to NFPA 99/EN ISO 7396-1/HTM02-01 standards The Medical Vacuum System shall ensure the minimum pipeline. Vacuum level of 450mmHg is maintained at the plant service connection point at the rated volumetric ‘free air’ flow rate with two pumps in standby. The bacteria filtration system shall be ‘duplexed’ such that each filter can be isolated for replacement of the filter.
Fully - automatic Oxygen Control Panel (indigenous) with automatic changeover from Running Bank to Reserve Bank of cylinders and having non-halogenated polymer in the high pressure side of the primary regulators and 40 micron inlet filter.
The hospital beds produced domestically have very few frivolous functions. The most sophisticated bed an ICU bed & ward which features
include polyethylene head and footboard, polyethylene side rails, stainless steel bed frame and patient support area. It also includes a
central break wheel to keep the bed in place.
Curtain Track Systems
The G-Rail hospital curtain rail has been the industry standard in the health care sector for years.
Functional, strong and available with a dust-resistant PVC cover strip.
Also available with handy accessories such as the IV rack, IV hook, curtain holder, etc. The rail can be mounted either
on the wall or on to the ceiling, of course, so that a solid system can be built. We can install our cubicle curtain track
electrically insulated in accordance with the NEN-1010 standard.
Walls and Ceiling Systems (PUFF PANEL.
Automated Operated Hermetically sealed Sliding Doors.
Planair Ceiling system.
Surgeon Control Panel.
Single arm and Doable arm surgeon pendent.
Single arm and Doable arm Anesthesia pendent.
Pressure Relief Dampers (PRD).
X-Ray Viewing Screen.
Operating writing List Board.
Peripheral Lights (LED light).
Air Handling Unit(AHU).
Pre Fabricated Modular Operation Theatre Wall Panel & Ceiling Panel with 0.8mm PPGI Sheet panels with puff 50mm thick with proper supports.
Operated Hermetically Sliding Door
Manual and Automatic Operated hermetically sealed Sliding Doors (1500mm wide 2100mm height) complete with glass vision window
of 300mm x 300mm with all necessary accessories etc.
Plan air Ceiling system with unidirectional airflow. Plenum unit, Holding structure & Top plenum are made of Aluminium Sheet 1.6mm thk
with aluminium extrusion frame & sealed gasket conforming to DIN 4799 standards for the air distribution system with
heppa filter having efficiency 99.97% down to 0.3 micron
The laminar flow system shall have such design that it provides "S" class Heppa filter.
|The filters will be placed terminally. The filter housing terminals are made of a one pice frame and plenum with perfect tightness features.
Diffuser : 2 layers monofilament precision woven polyester of uniform porosity with an open area of sufficient resistance to create laminar from
diffusers face and integral lighting provides an illuminating level in excess of 15000 Lux in operating area and
10000 Lux other electronic steeples dimming down to 5% without flicker. Planair Size 2400 X 2400m
1. Time Day Clock. 2. Time Elapse De Telephone set with memory.
3. General Lighting System.
4. Medical Gas Alarm Panel.
5. Hand FreThe surgeon control panel should meet Electrical safety codes for high & low voltage system, wired to the current IEE regulations.
The room Surgeon’s control panel should be modifiable with changing technology & equipment in operating environments. Control Panel will be
user friendly & ease of operating & maintaining purpose.
The panel should be “Membrane” type; configured to incorporate all the services that operation room staff required.
The fascia should be made with superior quality UV resistance membrane with sterilization feature.
The Panel should contain
6 or 9 service tiles as below:
6. Temperature & humidity indicator with controller.
7. HEPA Filter Status module.
8. Room Pressure Indicator.
9. Music control.
Single arm moveable arm surgeon pendent with 850mm long arm having weight carrying capacity of more
than 100kg, 8 nos electrical sockets 5/15 ampere, 3 shelfs (Aluminium) holding the shelfs.
2. 02 -N2O,
3. O2 - Vaccum
4. O2 - Air (04 bar - 1, 07 bar- 01)
Anesthesia Pendent Systems should have the facility to provide convenient positioning of medical equipment,
medical gas terminal units, electrical and specialty services in operation theatre.
Pendant shall be single arm, movable, ceiling mounted and have modular head
Should have aluminum powder coated rectangular body with one monitor mounting facility and inspection door at back side.
Shall be provided with electrical 5 & 15AMP socket, switch with indicator -8 nos.
Should have provision for gas outlets oxygen-2nos., Medical Air (4 Bar)- 2nos.,Vaccum - 2nos.,Nitrous oxide -1nos.
complete with hose assemblies can be accommodate within the pendant
Shall be provided with 2nos. of I.V pole with bracket
Pressure relief dampers should be provided in each room to prevent contamination of air from clean and dirty areas.
Suitably sized air pressure relief damper should be strategically placed, enabling differential room pressure to be maintained and ensure
that when doors are opened between clean and dirty areas.
Counter- weight balancing system should be provided in the PRD to maintain positive pressure inside the operation room.
Air pressure stabilizers should have a capability of controlling differential pressure to close tolerance.
The PRD should remain closed at pressure below the set pressure and should open fully at pressure and should open fully at pressure only
fractionally above the threshold pressure. The body should be epoxy powder coated as per standard BS colors.
First class electrolyzed steel plate should be used for body and with high grade SS304 stainless steel for blades.
The system should have electrical safety codes for high & low voltage system. The
theatre should be equipped with a 2 plate X-ray viewing screen(LED).
It should be designed to provide flicker free luminance for the film viewing purpose.
It should be installed flushed with theatre wall for hygienic and ease of cleaning purpose .
The X-Ray viewing screen should be designed for the purpose of front access.
The X-Ray viewing screen should be illuminated by 4 pieces of high frequency fluorescent lamps and the dimming is controlled by the
usage of dimming ballast with the PCB that is mounted inside the box.
Operating Writing Board
Operating writing List Board of size 948mm x 648mm complete with all accessories
Recess mounted IP54 protocol, non-hygroscopic Peripheral Lights for clean room application each set having (2 x 36 watt) compact flurecent
lamps and digital dimmable ballast.
PVC floorings are the most hygienic, longevity and as well as the most easy to clean and maintain flooring systems.
In the Modular Operation Theatre are homogenizes conductive, anti static and anti bacterial PVC Floorings used.
On the Homogenizes conductive, anti static and anti bacterial PVC Floorings are PUR laminas or polishers which are saturated with special methods.
Color is selected in according with the wall color.
The storage unit should be made with 1.50 mm thick EGP Zinc coated steel panels.
The storage unit should be divided 2 equal parts and each part should have individual glass doors with high quality locking system.
Each part will be provided with glass racks.
When Door 1 is opened the display on the Door 2 will indicate “WAIT” and at the Door 1 the display will indicate “DOOR OPEN”
When any of the Door is kept open beyond a particular time say 2 min, a buzzer will be blown and the display at the doors will
indicate “CLOSE DOOR”
When any door is opened the CF lamp is switched on, and the UV lamp will be switched off
Both Doors are provided with Electromagnetic locks
Our modular operation theatre are equipped with stainless steel surgical sinks.
We design and manufacture according to the layout plan of operation theatre.
Our manufactured surgical scrub sinks are easy to maintain and durable.